1st it works great, but you need to know a few items
A: if you restore the active f5 it will swack roles to "standby". This is a standard function.
B: The unit will go off-line and disconnect while the restoral takes places
C: than a oneline disconnect
D: you will probably need to do cfg-sync
During the restore the bigstart process will restart but the system will not reboot.
E: if you try to restore the same "file" twice you can see the following error
NSE ( network security expert) and Route/Switching Engineer
kfelix -----a----t---- socpuppets ---dot---com
=( @ @ )=